Audio Tekne


Integrated amplifiers

  • TFM-2000 6AS7G A1PP Stereo Pre-Amplifier                                                                                                             Remarkable quality and value 


This integrated amplifier employs transformer type ATT with a large supermalloy winding core for ultimate lossless signal transmission. Transformer-coupled throughout all stages, with fixed bias and class A push-pull circuit, it is characterized by close to no loss of low signal, and improved linearity of frequency response. It guarantees exceptional performance and sound quality that surpasses its competitors. 

Commonly used resistor-type volume controllers cause significant signal loss that results in poor sound quality and frequency response. By contrast, TFM-2000 adopts an exclusive volume control system that minimizes signal loss, for optimal sound quality. 



TYPE: Vacuum tube stereo integrated amplifier 
INPUTS: CD, TUNER, TAPE, AC, AUX
MAXIMUM INPUTS:CD, TUNER, TAPE, AV, AUX (2Vrms)
ATT: Lossless winding transformer type ATT (volume)
OUTPUTS: R-speaker 
POWER OUTPUT: 6W x 2
HARMONIC DISTORTION: Below 5% / 6W
FREQUENCY RESPONSE: 20Hz – 20KHz +/- 3dB (each tap)
RESIDUAL NOISE: Below 1,0 mV / 8 ohm
POWER CONSUMPTION: 180 VA
POWER SUPPLY: AC 100V, 50/60 Hz
DIMENSIONS: W 44.5 x H 22.5 x D 25.0 cm
WEIGHT: 24.5 kg


  • TFM-9412PCS Stereo integrated amplifier

        A superior integrated amplifier. If you do not espouse the idea of a separate pre-amplifier, this integrated pre-amplifier offers the best value in terms of performance and ease of use. It employs a powerful power supply circuit for excellent signal transmission, and several features that guarantee the same or better performance than a separate pre-amplifier. 

TFM-9412 features a lossless winding type ATT large supermalloy core transformer throughout all stages, fixed bias and class A push-pull circuit. Loss and frequency characteristics at the low-level signal are refined, and sound is exceptionally faithful to the original. Embodying a combination of the TFA-8902 preamplifier and TM-9402 power amplifier, the TFM-9412 is top quality equipment that represents a great value.

TYPE: Vacuum tube stereo integrated amplifier 
INPUTS: CD, TUNER, TAPE, AV, AUX
MAXIMUM INPUTS: CD, TUNER, TAPE, AV, AUX (3Vrms)
ATT: Lossless winding transformer type ATT (volume)
OUTPUTS: REC OUT (on / off switch) speaker terminal
POWER OUTPUT: 8 W x 2
HARMONIC DISTORTION: Below 1% / 6 W
FREQUENCY RESPONSE: 20 Hz – 20 KHz +/- 1 dB (each tap)
RESIDUAL NOISE: Below 1% mV / 8 ohm 
POWER CONSUMPTION: 170 VA
POWER SUPPLY: AC 100V, 50/60 Hz
DIMENSIONS: W 44.5 x H 22.5 x D 41.0 cm
WEIGHT: 31.0 kg