A deluxe flat amplifier employing an extra-large supermalloy core and built-in lossless winding transformer type ATT, both on input and output sides.
If the surprisingly natural sound of Audio Tekne’s ultimate flat amplifier TFA-9501 has captivated you, and you are looking for a lower-cost alternative without giving up much quality, this amplifier is for you. The TFA-8695 offers sound quality that comes very close to the original sound, and its performance nearly matches the TFA-9501.
When used with the TEA-8695 phono equalizer amplifier, this amplifier works wonders with LP record sound and provides the ultimate in quality music experience.
TYPE: Vacuum tube stereo flat amplifier
INPUTS: PHONO (TEA-8695 EQ AMP required), CD, TUNER, TAPE, AV, AUX
MAXIMUM INPUTS: PHONO, CD, TUNER, TAPE, AV, AUX (3 Vrms)
ATT:Lossless winding transformer type ATT (volume), 2 dB step (fine tuning) and 10 dB step (rough tuning)
OUTPUTS: REC OUT (on / off switch), BALANCE (Canon), UNBALACE (RCS) selectable / switchable
PRE OUT 1.6 Vrms (std), 13 Vrms (max)
FREQUENCY RESPONSE: 5Hz – 30KHz +/-1dB (each tap)
POWER CONSUMPTION: 100 VA
POWER SUPPLY: AC 100V, 50/60 Hz
DIMENSIONS: W 42.0 x H 17.0 x D 33.5 cm
WEIGHT: 23.5 kg
The ultimate flat amplifier with a supersize supermalloy core. Combine it with phono equalizer amplifier TEA-9501 to enjoy exquisite LP record sound.
The TFA-9501 was planned and designed with the highest quality in mind -- a cost-is-no-object approach, to capturing ultimate, pristine natural sound.
With this amplifier, CD sound comes incredibly close to the sound of an analog recording. It is not an overstatement to say that it exceeds the analog amplifier sound produced by most audio equipment.
TYPE: Vacuum tube stereo flat amplifier (embedded power supply for TEA-9501)
INPUT TERMINALS: PHONO (TEA-9501 EQ AMP required), CD, TUNER, TAPE, AV, AUX
MAXIMUM INPUT: PHONO, CD, TUNER, TAPE, AV, AUX (3Vrms)
ATT: Lossless winding transformer type ATT (volume), 2 dB step (fine tuning) and 10 dB step (rough tuning)
OUTPUT TERMINAL: REC OUT (on/off switch), BALANCE (XLR), UNBALACE (RCS) selectable/switchable
POWER OUTPUT: PRE OUT 1.6 Vrms (std), 13 Vrms (max)
FREQUENCY RESPONSE: 5 Hz – 30 kHz +/-1dB (each tap)
POWER CONSUMPTION: 100 VA if connected to TEA-9501
POWER SUPPLY: AC 100V, 50/60 Hz (embedded power supply for TEA-9501)
DIMENSIONS: W 44.5 x H 22.5 x D 34.6 cm
WEIGHT: 55 k